I
IEI-Supplied Parts/Optional Items, 2-6
Inserting Circuit Boards, 2-15
INSTALLATION, Chapter 2, 2-1
checking the cables, 2-3 - 2-6
defaulting prox.pad memory, 2-16 -
2-17
gang box and mounting, 2-2
iei-supplied parts/optional items, 2-6
inserting circuit boards, 2-15
installation configurations, 2-1
mounting the prox.pad unit, 2-7 -
2-14
mounting the unit on metal, 2-2
other installation considerations, 2-2
performing a glass mounted
installation, 2-9
performing a secure installation, 2-11
performing a wall mounted
installation, 2-7
power supply/current requirements,
2-2
prox.pad pin connectors, 2-5
rf interference, 2-2
Installation Configurations, 2-1
INTRODUCTION, Chapter 1, 1-1
about this manual, 1-1
design change disclaimer, 1-1
design function, 1-4
general description, 1-4
items supplied from the factory, 1-3
items the installer must supply, 1-3
prox.pad operation, 1-5 - 1-8
prox.pad plus specifications, 1-6
reproduction disclaimer, 1-1
safety warnings and cautions, 1-1
technical support, 1-1
warranty, 1-2
Items Supplied from the Factory, 1-3
Items the Installer Must Supply, 1-3
K
Keypress Sequences, 4-7
L
Leap Year, 4-24
Lockout By Group, 4-20
Lockout By Location, 4-19
M
Masking, 4-29
Master Code (User #1), 4-1
Master Code and Supervisor Code
Special Features, 4-2
Midnight Crossing TimeZones, 4-22
MISCELLANEOUS INFORMATION,
Chapter 6
customer service policy, 6-1
rma policy, 6-2
Mounting the prox.pad Unit, 2-7 -
2-14
Mounting the Unit on Metal, 2-2
N
Networking Multiple prox.pad plus
Units Together, 3-14 - 3-15
Index
I-2 prox.pad plus Install/Program. Manual, PPP, D2
To Next Page
Loading...