O
Other Installation Considerations, 2-2
P
Performing a Glass Mounted Installa-
tion, 2-9
Performing a Secure Installation, 2-11
Performing a Wall Mounted Installa-
tion, 2-7
Performing Power Supply Integrity
Test, 5-6 - 5-8
Power Supply/Current Requirements,
2-2
Printing a Programmed Users List,
4-32
Printing a Transaction Log, 4-30
Printing a Transaction Log Manually,
4-31
Programmed Users Log, 4 -15
PROGRAMMING, Chapter 4, 4 -1,
4-16 - 4-18
adding new or changing existing
codes/cards, 4-7
assigning outputs, 4-16
batch load by presentation, 4-12
batch load cards manually (without
presentation), 4-14
block delete of users, 4 -15
changing the lock output time, 4-16
daylight savings time, 4-23
deleting users, 4-15
enabling/disabling users command,
4-13
erasing a transaction log, 4-32
erasing entire memory/resetting
system defaults, 4-6
error lockout, 4-26
holidays, 4-23
leap year, 4-24
lockout by group, 4-20
lockout by location, 4-19
master code (user #1), 4 -1
master code and supervisor code
special f eatures, 4-2
midnight crossing timezones, 4-22
printing a programmed users list,
4-32
printing a transaction log, 4-30
printing a transaction log manually,
4-31
programming a transaction dump
code, 4-31
programming card only u se, 4-11
programming code and card options,
4-7
programming code and card use, 4-10
programming code only use, 4 -10
programming code or card, 4-11
programming commands, 4-34 - 4-40
programming from the keypad, 4-1
programming keypad options and
parameters, 4-19 - 4-28
programming overview , 4-1 - 4-6
programming user data, command
50, full format, 4-9
programming user types, 4-8
programming users, 4-7 - 4-15
prox.pad default settings, 4-3
prox.pad led indicators/sounder
operations, 4-4 - 4-5
prox.pad plus user types, 4-8
Index
prox.pad plus Install/Program. Manual, PPP, D2 I-3
To Next Page
Loading...