International Electronics prox.pad plus - Page 106

quick program feature, 4-10
resetting the master code and
system defaults only, 4-5
selecting transaction log information,
4-29
setting forced door output time, 4-18
setting propped d oor output time,
4-18
supervisor code (user #2), 4-2
time/date set, 4-24
timed anti-passback, 4-27
timezone/holiday features, 4 -21
turning audio keypress feedback
on/off, 4-25
turning visual led/keypress indicator
on/off, 4-24
user lockout option, 4-19
using the printing features, 4-29 -
4-33
Programming a Transaction Dump
Code, 4-31
Programming Card ONLY Use, 4-11
Programming Code and Card
Options, 4-7
Programming Code AND Card Use,
4-10
Programming Code ONLY Use, 4-10
Programming Code OR Card, 4-11
Programming Commands, 4-34 - 4-40
Programming from the Keypad, 4-1
Programming Keypad Options and
Parameters, 4-19 - 4-28
Programming Overview, 4-1 - 4-6
Programming User Data, Command
50, Full Format, 4-9
Programming User Types, 4-8
Programming Users, 4-7 - 4-15
prox.pad Default Settings, 4-3
prox.pad LED Indicators/Sounder
Operations, 4-4 - 4-5
prox.pad Operation, 1-5 - 1-8
prox.pad Pin Connectors, 2-5
prox.pad plus Communications, 3-13
prox.pad plus Specifications, 1 -6
prox.pad plus User Types, 4-8
Q
Quick Program Feature, 4-10
R
Reproduction Disclaimer, 1-1
RequesttoExit(REX)switch,3-9
Resetting the Master Code and
System Defaults Only, 4-5
REX feature, 3 -9
REX input, 5-7
RF Interference, 2-2
RMA Policy, 6-2
S
Safety Warnings and Cautions, 1-1
Selecting Transaction Log Informa-
tion, 4-29
Setting Forced Door Output Time,
4-18
Setting Propped Door Output Time,
4-18
Silicone, 5-9
Supervisor Code (user #2), 4-2
Index
I-4 prox.pad plus Install/Program. Manual, PPP, D2