International Electronics prox.pad plus - Page 88

Action Press Details
User Types
0 toggle code
1 standard access
2logdump
3 lockout
4 extended lockout
5singleuse
6 relock code
7 emergency
16a. Add code only
user
50 # type # location # key pin *
key pin *
“code only” user
16b.Addcardonly
user by presentation
50 # type # location # **
<present card>
“card only” user by
presentation
16c. Add card AND
code user
50 # type # location # key pin *
key pin * <present card>
“card AND code”
user
16d. Delete user
50#0#location#**
delete user
17. Program 26-bit
“card only” user
without presenting
card
51 # type # location # card pin *
card pin *
Location MUST
begreater than 2;
Master/Supervisor
cannot be set as
“card only”
18. Program “card
OR code” user
52 # type # location # key pin * key pin
* <present card>
19. Program
consecutive “card
only” users by
presentation
53 # type # start user # **
<present card> <present card> ...
Start user MUST b e
greater than 2;
Master/Supervisor
cannot be set as
“card only”
Chapter 4: Programming 4.6 Programming Commands
4-38 prox.pad plus Install/Program. Manual, PPP, D2