19 of 42
Product information
3.6 RollerDrive performance data
Gear
ratio
Speed
range
[m/s]
Rated
torque
[Nm]
Start-up
torque
[Nm]
Holding
torque
[Nm]
9:1 0.09 to 1.75 0.45 1.10 0.36
12:1 0.07 to 1.31 0.61 1.46 0.48
16:1
1)
0.05 to 0.98 0.81 1.95 0.64
20:1
1) 2)
0.04 to 0.78 1.01 2.44 0.80
24:1
1) 2)
0.03 to 0.65 1.21 2.92 0.96
36:1
1) 2)
0.02 to 0.44 1.82 4.38 1.44
48:1
1) 2)
0.02 to 0.33 2.42 5.85 1.92
64:1
1)
0.01 to 0.25 3.23 7.80 2.56
98:1
1)
0.01 to 0.16 4.84 11.69 3.84
1)
EC310 IP66
2)
EC310 DF
Before the run-in, the values can vary by up to ±20%. After the run-in phase, the values for 95% of all RollerDrives
used vary only in the range of ±10%.
3.7 Controls for the RollerDrive EC310
• DriveControl
• ZoneControl
• ConveyorControl
• MultiControl AI
More detailed information on the controls can be found in the respective operating manual, in the
"Conveyor rollers, RollerDrive, controls" Interroll catalogue or at www.interroll.com.
To Next Page
Loading...
Need help?
General
