Decommissioning and disposal
9 Decommissioning and disposal
CAUTION
Risk of injury from following incorrect procedure.
¾
¾ Only decommission the RollerDrive when the system has been disconnected from the power supply.
¾
9.1 Decommissioning
¾ Disconnect the RollerDrive cable from the control system.
¾ Remove the outer nut from the motor shaft.
¾
¾
9.2 Disposal
The operating company is responsible for disposing of the RollerDrive according to correct procedure. In
be observed.
To Next Page
Loading...
Need help?
General
