33 of 42
Start-up and operation
6 Start-up and operation
6.1 Warning notices for start-up and operation
WARNING
Risk of crushing and potential hazards from rotating parts due to uncontrolled start-up of the RollerDrive
¾
¾ Do not remove the protective equipment.
¾
NOTE
Possible damage to the RollerDrive through induction.
¾ Do not slide any objects over the roller conveyor by hand.
¾ Do not turn the RollerDrive by hand.
6.2 Start-up
Check before the initial start-up
¾ Ensure that there are no points of contact between objects and rotating/moving parts.
¾
¾ Ensure that no additional hazards are formed through the interfaces to other components.
¾
¾ Ensure that no persons are in the hazardous areas by the conveyor system.
¾ Check all protective equipment.
Information on start-up can be found in the operating manual for the Interroll control or motor control that
is used.
To Next Page
Loading...
