31
7.2.2 Status Display
The ON/OFF LED (7) also functions as a Status Display or Error
Display. Flashing of the display indicates a malfunction of the
electrical equipment.
The cause of the malfunction is indicated by a flash code.
(Error codes see Chap. "Error Codes" on page 49.)
The ACS Joystick Box monitors the following functions:
• Monitoring the electronics
• Monitoring the electrical components
• Monitoring the power supply
Status Display
7.2.3 Multi-Purpose Display
Using the Joystick Box, you can select a range of different electrical
adjustment options.
The symbols shown on the Multi-Purpose Display (2) indicate which
adjustment option (mode) is active at the moment.
Multi-Purpose Display
To Next Page
