Invacare MK6i - Automatic Speed Reduction; Technical Specifications of the Lifter Module

94
11.3 Automatic speed reduction:
The STORM Lifter has a safety function, which automatically reduces the speed of the wheelchair as soon
as the lifter is raised. In this mode the Status Display on the Joystick Box flashes two times repeatedly.
The speed of the STORM is reduced as follows:
• Lifter down = 100% of wheelchair's maximum power.
• Lifter up = 30% of wheelchair's maximum power.
• To increase your speed again, lower the lifter completely.
11.4 Technical Specifications of the Lifter Module:
• Seat can lifted up to approx. 30 cm.
• Maximum load (payload)100 kg.
• Adjustment of seat tilt (manual or electric) between -2° and +9° in relation to horizontal.
• Weight of the Lifter Module including electric actuator = approx. 14.5kg
• The Lifter Module can be retrofitted.
Retrofitting can be done at the factory or by a qualified dealer.