Invacare MK6i - Adjusting the Height of the Armrests; Adjusting the Height of the Sideframes; Seat Width Adjustment

59
9.1.4 Adjusting the height of the armrests
• Loosen the clamping lever.
• Pull the armrest upwards until the desired height is reached.
• Re-tighten clamping lever again.
9.1.5 Adjusting the height of the sideframes
• Loosen the screws using a 4 mm Allen Key.
• Adjust the sideframes to the desired position.
• Tighten the screw again.
9.1.6 Seat width adjustment:
• The clamping levers which allow adjustment of the seat width are located
under the seat.
Position of the clamping
levers