Goodrive100-PV series solar pumping inverters Keypad operation procedure
-21-
“0.0.0.0.0” will be displayed. Unless using the correct password, the operators cannot enter it.
Set P07.00 to 0 to cancel password protection function.
The password protection becomes effective instantly after retreating from the function code
editing state. Press PRG/ESC again to the function code editing state, “0.0.0.0.0” will be
displayed. Unless using the correct password, the operators cannot enter it.
Figure 4-5 Sketch map of password setting
4.3.3 How to watch the inverter state through function codes
GD100-PV series inverters provide group P17 as the state inspection group. Users can enter
into P17 directly to watch the state.
Figure 4-6 Sketch map of state watching
To Next Page
Loading...