INVT GD100-0R4G-SS2-PV - P15.25 Initial Reference Voltage Display; P15.26 Min. Voltage Reference During Max. Power Tracking; Recommended Power Cables for Standard Inverter Models

Goodrive100-PV series solar pumping inverters Options and use
-70-
Inverter power
Output reactor
GD100-5R5G-2-PV
OCL20A03504-1
GD100-7R5G-2-PV
OCL40A01804-1
GD100-0R7G-4-PV
OCL5A14004-1
GD100-1R5G-4-PV
OCL5A14004-1
GD100-2R2G-4-PV
OCL7A10004-1
GD100-004G-4-PV
OCL10A07004-1
GD100-5R5G-4-PV
OCL15A04704-1
GD100-7R5G-4-PV
OCL20A03504-1
GD100-011G-4-PV
OCL30A02304-1
GD100-015G-4-PV
OCL40A01804-1
GD100-018G-4-PV
OCL50A01404-1
GD100-022G-4-PV
OCL60A01204-1
GD100-030G-4-PV
OCL80A00874-1
GD100-037G-4-PV
OCL90A00784-1
Note:
The rated derate voltage of the output reactor is 1%±15%.
Above options are external, and the customer should specify the model when purchasing.
A.5 Filters
C3 filters are built in GD100-PV series inverters with rated power of equal to or greater than
4kW. Jumper J10 determines the connection.
Connection method: Open the lower cover, find the location of J10, and insert the jumper
terminals equipped with the inverter.
Note: After the filter is added, EMI input meets requirements for level C3.