iPECS-LIK
Feature Description & Operation Manual Issue 6.0d1
135
Conditions
1. When the mobile phone places an external call through iPECS, the CLI of the
corresponding station is used.
2. The Mobile Extension features are supported via system digital (T1 and ISDN) lines
only.
3. Message Wait and Callback cannot be activated to a mobile phone.
4. The Mobile Extension feature is not supported over a distributed networked
environment.
5. When an incoming ISDN DID call is received, the system will access an ISDN line
and place a call to the mobile phone. Thus, an ISDN line must be available for the
system to notify the mobile user of the incoming call.
6. Hold and Transfer Recalls to the mobile phone are sent to mobile phone and the
associated station.
7. ACD, Circular and Terminal Hunt Group calls can be routed to the active Mobile
Extension.
Programming
1 Mobile Extension Table (PGM 236)
Related Features
DND (Do Not Disturb)
Station Message Wait/Call Back
Attendant Recall
Distributed Control Network
Station User Programming & Codes
Hardware
iPECS Phone
To Next Page
Loading...
