iPECS iPECS-LIK - Ringing Groups Indication

iPECS-LIK
Feature Description & Operation Manual Issue 6.0d1
153
Conditions
1. The timed pause is used only with analog CO lines.
Programming
SYSTEM
1 Pause Timer (PGM 181-Btn 10)
Related Features
 Station Speed Dial
 System Speed Dial
Hardware
2.64.3 Station Speed Dial
Description
Each user can store commonly dialed numbers for easy access using Station Speed Dial bins.
With the iPECS-Micro, iPECS-50 and 100, each station has access to 20 Speed Dial numbers
and, with other iPECS systems, each station has access to 100 Speed Dial numbers. Each
Speed Dial number can be up to 48 digits in length and may include special instruction codes.
Special instruction codes available are:
‘*’ as 1st digit
Activate Display Security, do not display number.
Flash as 1st digit
Activate dial tone detect.
‘#’
Insert a pause dialing command.
‘*’ not 1st digit
Switch from Pulse to DTMF dialing.
[MSG/CALLBK]
Send as ISDN Keypad Facility IE.
[HOLD]
Insert a Pulse to tone switchover.
iPECS Phone users may assign a Flex button for One-Touch access to a specific Speed Dial
bin. In addition, the iPECS Phone user may assign a Telephone number directly to a Flex
button. In this case, the telephone number is allocated to the highest numbered available
Station Speed Dial bin.
Operation
iPECS Phone
To assign a Flex button as a {STATION SPEED DIAL} button
1. [PGM] + {FLEX} + [SPEED] + Station Speed Dial bin number + [SAVE]
To dial using a Station Speed Dial with a [SPEED] button
1. Lift handset or press the [SPEAKER] button.
2. Press the [SPEED] button.
3. Dial the desired bin number.