iPECS iPECS-LIK - CO Ring Detect

iPECS-LIK
Feature Description & Operation Manual Issue 6.0d1
276
3.10 PAGING
3.10.1 Internal/External & All Call Page
Description
A station, which is permitted to access page facilities, can connect and transmit voice
announcements to any or all of the systems Internal/External Page zones. Stations are
grouped into “zones” to receive pages to the zone. Stations not assigned to any zone will not
receive a page including All Call pages.
A page warning tone, if assigned, will be provided to the Page Zone(s) prior to the audio
connection. The user is allowed to continue the page for the specified Page Time-out timer
after which the user is disconnected and the Page Zone(s) is returned to idle.
The default Page Zone dial codes are as follows:
iPECS-Micro
iPECS-50
iPECS-100
iPECS 300
iPECS 600
iPECS 1200
Internal Page Zones
501~510
501~510
501~535
301~400
Internal All Call Page
543
543
543
543
External Page Zones
545
545~546
545~546
545~546
External All Call Page
548
548
548
548
All Call Page
549
549
549
549
iPECS-Micro have same default Page Zone dial codes with iPECS-50 except External Page.
(iPECS-Micro does not have external port.)
Flexible buttons of an iPECS Phone may be assigned to access a Page Zone as a {PAGE
ZONE} button.
Operation
iPECS Phone
To assign a Flex button as a {PAGE ZONE} button
1. [PGM] + {FLEX} + Page Zone number + [SAVE]
To make a page,
1. Lift the handset.
2. Dial the desired paging code or press a {PAGE ZONE} button.
3. If assigned, after the Page Warning Tone, make announcement.
4. Replace the handset and go on-hook.
To queue for a page when busy is received.
1. Press the [MSG/CALLBK] button.
2. Replace the handset returning to idle.