iPECS iPECS-LIK - Auto Service Mode Control

iPECS-LIK
Feature Description & Operation Manual Issue 6.0d1
26
To leave a voice message
1. After Greeting and beep, leave the message.
2. Hang up to quit recording or dial “*” for further options.
Conditions
1. The System Administrator or Supervisor may change the Group Mailbox password.
2. An external caller (CO/IP call) cannot access the Group Mailbox to retrieve
messages.
Programming
STATION GROUPS
1 Group Attributes (PGM 191)
2 Mailbox Message Wait Station (PGM 191-Btn 24-2)
3 Mailbox Password (PGM 191-Btn 24-3)
Related Features
 External Auto Attendant/Voice Mail
 Station Groups
 VMIM/VSF Voice Mail
 Supervisors
Hardware
 iPECS Phone
2.5.8 Group Name
Description
Each hunt group is assigned a name of up to 12 characters. The name is employed as the
called party display for internal callers in the output of group statistics.
Operation
System
Operation of this feature is automatic when programmed.
Conditions
Programming
STATION GROUPS
1 Station Group Attributes (PGM 191)
2 Terminal/Circular Group Name (PGM 191-Btn 20)
3 ACD Group Name (PGM 191-Btn 22)
4 Ring Group Name (PGM 191-Btn 18)
5 VM Group Name (PGM 191-Btn 9)