iPECS iPECS-LIK - DID Call Wait

iPECS-LIK
Feature Description & Operation Manual Issue 6.0d1
312
4.19 MULTIPLE CLI
Description
This feature provides flexibility for CLI service.
In PGM 114, CLI Station Number(PGM 114 – F6) can be programmed.
Station CLI 2 ~ Station CLI 5 will be newly made.
By using these new CLIs, a specific CLI can be provided to the called party.
The name – [CLI Station Number] will be changed to [Station CLI 1].
In PGM 143 – Station CLI Type, CLI can be chosen between Station CLI 1 to Station CLI 5.
It will be newly made.
Station CLI 1 means Original CLI Station Number(PGM 114 – F6) is used.
Station CLI 2 ~ Station CLI 5 means newly added CLI Station Numbers are used.
In PGM 143 – CLIP table index, CLIP can be chosen.
The range is available from 00 – 50.
In case of CLIP table index 00 to 49, then normal CLI making way is applied.
In case of CLIP table index 50, then ONLY Station CLI Station Number(PGM 114 – F6) can be
sent by CLI without adding any prefix.
The 50th CLIP index will be used generally to all CLI cases(from Station CLI 1 to Station CLI 5).
The 50th CLIP index name will be changed to [Station CLI].
Operation
Example - Station 110 has 5 CLI and related program is as followings.
1. CLI Station Number (Original CLI) - 110.
2. Station CLI 2 – 01234567.
3. Station CLI 3 – 01234567890123456.
4. Station CLI 4 – 110.
5. Station CLI 5 – 1234567890.
6. COLP Table index 01 – 450.
7. Area Code – 031.
8. In PGM 143, CO 1 is set to CLI 1, CO 2 is set to CLI 2 …. CO 5 is set to CLI 5.
Station 110 Call to outside via CO 1, CLIP table is 01.
1. CLI is 031 450 110.
Station 110 Call to outside via CO 2, CLIP table is 01.
1. CLI is 031 450 01234567.
Station 110 Call to outside via CO 2, CLIP table is 50(Station CLI).
1. CLI is 01234567.
Station 110 Call to outside via CO 3, CLIP table is 50(Station CLI).