iPECS iPECS-LIK - Station Call Coverage

iPECS-LIK
Feature Description & Operation Manual Issue 6.0d1
160
2.65 STATION CALL COVERAGE
Description
The Call Coverage feature permits an iPECS Phone user to receive ring and answer calls
directed to a covered station. This feature is generally employed to allow a Secretarial
answering position to cover calls to other stations. When a covered station rings, the {CALL
COVERAGE} button LED will flash and the covering station may receive ring (immediate or
delayed) for the call. The covering station can answer the call using the {CALL COVERAGE}
button, terminating ring at other stations. Once answered, the LED of {CALL COVERAGE}
buttons for the station at other covering stations will extinguish.
Operation of this feature requires a {CALL COVERAGE} button at the covering iPECS Phone
and the covered station must activate call coverage. A station can have multiple Call Coverage
buttons each covering a different station and multiple stations can have a Call Coverage button
for a given station.
Operation
iPECS Phone
To assign a {CALL COVERAGE} button at the covering station
1. [PGM] + {FLEX} + “67” + covered Station number + [SAVE]
To activate Call Coverage at the covered station
1. Press the [PGM] button.
2. Dial “141”, the Call Coverage code.
3. Dial “1” to enable or “0” to disable Call Coverage.
To assign ring for a {CALL COVERAGE} button
1. Press the [PGM] button.
2. Dial “142”, the Call Coverage Ring code.
3. Dial the delay in ring cycles (“0”-“9”).
When a covered station receives a call, the covering station will receive the following display:
CALL FOR STA xxxx
FROM yyyy time
Conditional Operation by Administrative Attributes
1. ‘Call Coverage On Busy’ =
OFF : Call Coverage is implemented when a covered station is on idle state
ON : Call Coverage is implemented when a covered station is on idle or busy state
2. ‘Call Coverage Through Mobile Ext’ =
OFF : Call Coverage Ring is not delivered to Mobile Extension
ON : Call Coverage Ring is not delivered to Mobile Extension
3. ‘Call Coverage On Busy Range’ =
External Call Only : Call Coverage only for external call when covered station is
busy.
External and Internal Call : Call Coverage both for external & internal call when
covered station is busy.