iPECS-LIK
Feature Description & Operation Manual Issue 6.0d1
173
Conditions
1. When the Lost Call Count is reset, the SMDR port will provide a “count reset”
message.
2. Individual Lost Call records are only available in real-time and not on-demand.
3. “Print Incoming Calls” and “Print Lost Calls” must be enabled in the SMDR
Attributes for the system to output real-time Lost Call records and for the Lost Call
Count summary report.
4. The fields of a Lost Call Record are the same as a normal SMDR Call Record.
Programming
SYSTEM 1 SMDR Attributes (PGM 177)
Related Features
Call Cost Display
SMDR Call Records
Traffic Analysis
Hardware
RS-323 device to capture SMDR
To Next Page
Loading...
