16 Freddy
For a correct operation we recommend placing the
food starting from the lower grille, already integrated
in the appliance (do not place hot elements or food
directly on the base but always use the grille), and place,
if necessary, other food in the upper shelf supplied,
paying attention not to exceed the maximum load
indicated on the product specications.
When using the drinks chilling function, position the
bottles and cans directly on the base removing the
shelves.
Product temperature
For the BLAST CHILLING +3 °C, SOFT
FREEZING -18 °C and FREEZING -18 °C cycles:
Avoid leaving cooked food to cool or quick freeze at
room temperature for prolonged time. Food kept at
room temperature looses humidity, initial qualities
such as colour, smell and avour, and the possibility of
bacterial contamination increases.
It is recommended to start the blast chilling or freezing
cycle as soon as preparation and cooking is completed,
paying attention to start the cooling cycle when the
product is still at a temperature higher than 70 °C.
For improved yield and speed, perform a pre-
cooling cycle with empty machine for about 10
minutes before inserting the hot product.
Control Panel
CLEANING THE CELL
COLD
FUNCTIONS
HOT
FUNCTIONS
1
3
2
4
1 Cold functions selection
2 Hot functions selection
3 Chamber cleaning key
4 Change settings key
Use
The FREDDY display features "Soft-touch" controls and is
completely free from protruding buttons.
It is used by gently touching the icons with your ngers;
do not use other objects, such as knives, forks, etc.
When the appliance is powered the display shows the
"IRINOX" logo for 3 seconds. For energy-saving reasons,
after 1 minute of inactivity the display turns o and the
time is shown: by touching the display the "FUNCTION
SELECTION" screen will appear.
To Next Page
Loading...
