irinox Freddy 60 - Defrosting

38 Freddy
DEFROSTING
Select COLD FUNCTIONS.
COLD
FUNCTIONS
Select DEFROSTING cycle.
User guide
Press the
?
key to view a short description as information window. The
key makes you go back to the previous page.
The key makes you go back to the initial screen.
START
Start cycle.
The temperature inside the chamber detected by the air probe is shown at
the top right-hand side . The defrosting time, 1h by default, is shown on
the left. The air temperature inside the chamber during defrosting phase, +15
°C by default, is shown in the middle of the screen and the time you wish the
food to be defrosted, which is zero by default, is shown on the right.
Press the key to access the screen for time setting during defrosting
phase. The defrosting time setting screen will appear. (defrosting time can be
set from 1 min. to 5 h).
To edit the time press the
+
-
keys to increase or decrease the time by 1
minute. If you wish to increase or decrease the time in a faster manner, use
the horizontal dragging.
Press the
SAVE
key to conrm the time modication, while press to go
back to the previous screen without saving any change.
Press the key to access the screen for chamber temperature setting
during defrosting phase.
The screen for chamber temperature setting during defrosting phase will
appear. (defrosting temperature can be set between -20 °C and +40 °C).
To edit the temperature press the
+
-
keys to increase or decrease the
temperature by 1 °C. If you wish to increase or decrease the temperature in a
faster manner, use the horizontal dragging.
Press the
SAVE
key to conrm the temperature modication, while press
to go back to the previous screen without saving any change.
+3°C
?
START
19:151h:00 15°C
3h:30
SAVE
- +
+
46°C
SAVE
- +
+