irinox Freddy 60 - FREEZING -18 °C Cycle AUTOMATIC Cycle with Core Probe

32 Freddy
FREEZING -18 °C cycle
AUTOMATIC cycle with core probe
Select COLD FUNCTIONS.
COLD
FUNCTIONS
Select FREEZING -18 °C cycle.
Select the AUTOMATIC WITH CORE PROBE key.
User guide
Press the
?
key to view a short description as information window. The
key makes you go back to the previous page.
The key makes you go back to the initial screen.
START
Start cycle.
The temperature inside the chamber detected by the air probe is shown at
the top right-hand side .
The core temperature value (detected by the probe) that the food must reach
at the end of the freezing cycle with core probe is displayed in the middle.
The temperature detected in the food core will appear by starting the cycle
in the screen, while the temperature inside the chamber detected by the air
probe will be shown at the top right-hand side .
Press on the central active area to view the time elapsed from the start of the
freezing cycle with core probe.
Press again on the central active area to view the time elapsed from the cycle
start and go back to the previous screen.
By pressing the
STOP
key for 1 sec. the cycle is stopped and you go back to
the initial cold functions screen.
AUTOMATIC
WITH CORE
PROBE
TIMED
MANUAL
+25°C
?
START
-18°C
?
+3°C
+25°C
STOP
?
0:15:28
+8°C
STOP