irinox Freddy 60 - Drinks Chilling

36 Freddy
DRINKS CHILLING
Select COLD FUNCTIONS.
COLD
FUNCTIONS
THE DRINKS CHILLING cycle has been selected.
User guide
Press the
?
key to view a short description as information window. The
key makes you go back to the previous page.
The key makes you go back to the initial screen.
START
Start cycle.
The temperature inside the chamber detected by the air probe is shown at
the top right-hand side .
Chilling time, 20 min. by default, is displayed in the middle (time can be
edited during operation).
Press on the central active area to access the time editing screen.
The chilling time setting screen will appear. (the drinks chilling time can be
set from 1 min. to 50 min.).
To edit the time press the
+
-
keys to increase or decrease the time by 1
minute. If you wish to increase or decrease the time in a faster manner, use
the horizontal dragging.
Press the
SAVE
key to conrm the time modication, while press to go
back to the previous screen without saving any change.
Press the
START
key to start the drinks chilling cycle. During operation the
display shows the drinks chilling cycle time left (in hours, minutes and
seconds) that can be edited by selecting . You will access the time
editing screen which is the same described above. The temperature inside the
chamber detected by the air probe is shown at the top right-hand side .
By pressing the
STOP
key for 1 sec. the cycle is stopped and you go back to
the initial cold functions screen.
+3°C
?
START
0h:20
0h:20
SAVE
- +
+
?
0:15:28
+8°C
STOP