EasyManua.ls Logo

irinox Freddy 60 - Page 39

irinox Freddy 60
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Freddy 39
Press to access the time editing screen to set the time you wish the
food to be defrosted. Delay time can be set in this screen.
The minimum value that can be displayed and set is zero, while the maximum
value is 48 h (these hours relate to the delay, then the time displayed is
the sum of the two times, i.e. defrosting time and delay time. Therefore, by
changing the time, the initial cold storage phase (-20 °C) time is increased
before defrosting phase).
To edit the time press the
+
-
keys to increase or decrease the time by 1
minute. If you wish to increase or decrease the time in a faster manner, use
the horizontal dragging.
Press the
SAVE
key to conrm the time modication, while press
to go
back to the previous screen without saving any change.
Press the
START
key to start the cycle. During the cycle in progress, until
defrosting phase has not started, the time left (countdown) of cold storage
(-20 °C) will be displayed.
This time can be edited by pressing . The screen to change the time you
wish the defrosted food to be ready will appear; this screen acts on the cold
storage (-20 °C) time, as the defrosting phase has not started yet.
To edit the time press the
+
-
keys to increase or decrease the time by 1
minute. If you wish to increase or decrease the time in a faster manner, use
the horizontal dragging.
Press the
SAVE
key to conrm the time modication, while press
to
go back to the previous screen without saving any change. The chamber
temperature detected by the air probe is shown at the top right-hand side of
the display .
Press on the central active area to view the time your food will be ready (i.e.
defrosting phase end). This value is a read only value and is updated when it
is edited in the previous screens.
Press again on the central active area that shows the defrosted food time to
go back to the previous screen.
By pressing the
STOP
key for 1 sec. the cycle is stopped and you go back to
the initial cold functions screen.
19:15
SAVE
- +
+
?
0:22:25
-7°C
STOP
19:15
SAVE
- +
+
?
0:22:25
-7°C
STOP
?
19:15
-7°C
STOP

Table of Contents

Related product manuals