irinox Freddy 60 - Page 5

Freddy 5
Guided use examples 21
Pre-cooling 21
BLAST CHILLING +3 °C cycle - MANUAL cycle (with timer) 22
BLAST CHILLING +3 °C cycle - AUTOMATIC cycle with core probe 24
SOFT FREEZING -18 °C cycle - Manual cycle (with timer) 26
SOFT FREEZING -18 °C cycle - AUTOMATIC cycle with core probe 28
FREEZING -18 °C cycle - Manual cycle (with timer) 30
FREEZING -18 °C cycle - AUTOMATIC cycle with core probe 32
STORAGE cycle 34
DRINKS CHILLING 36
DEFROSTING 38
LOW TEMPERATURE COOKING cycle - MANUAL cycle (with timer) 41
LOW TEMPERATURE COOKING cycle - AUTOMATIC cycle (with core probe) 45
RISING cycle 49
READY MEAL cycle - MANUAL cycle (with timer) 52
READY MEAL cycle - AUTOMATIC cycle (with core probe) 56
STORAGE cycle 59
CELL CLEANING-DEFROSTING cycle 61
Product storage 62
Vacuum (optional) 62
Maintenance and faults 63
Standard maintenance 63
Basic safety rules 63
Cleaning of external surfaces 63
Panel 63
Chamber cleaning 63
Evaporator/condenser cleaning 63
Downtime 64
FREDDY disposal 64
Disposal 64
Alarm table 65
Info - Assistance service 65
Your data 65
Dimensions ± 5mm. The measures provided are indicative and not binding.
The original text of this publication, written in Italian, is the only reference for the settlement of any controversy that could arise from the
misinterpretation of the copies translated in one of the European Community languages.
The manufacturer reserves all property rights of this publication: the information contained in the manual shall not be disclosed to third
parties. Any duplication, fully or partial, including photocopies or duplication using other systems, as well as electronic acquisition systems, not
authorised in written form by the manufacturer violates the copyright conditions and legal action will be taken.
The manufacturer reserves the right to modify and improve the equipment at any time, without prior notication.
The manual reects the state of the art at the time of commercialisation of the equipment and is an integral part of it.
The publication is complying with current directives at the time of commercialisation; the manual shall not be considered inadequate due to any
regulation update or equipment modication.
Any integration to the manual that the Manufacturer shall deem necessary to send to the users shall be stored together with the manual and will
become an integral part of the same.
HOT
FUNCTIONS
COLD
FUNCTIONS