TM3160F,TM3200F&TM3240F
4
PERSONAL SAFETY INSTRUCTIONS
Whenever you see the words and symbols below ,
used in this Operator's Instruction Book and on
decals, you MUST take note of their instructions as
they relate to personal safety.
DANGER: This symbol together with the
word DANGER indicates an imminently haz-
ardous situation that, if not avoided, will
result in DEATH OR VERY SERIOUS INJURY.
WARNING: This symbol together with the
word WARNING indicates a potentially haz-
ardous situation that, if not avoided, could
result in DEATH OR VERY SERIOUS INJURY.
CAUTION: This symbol together with the
word CAUTION is used to indicate a poten-
tially hazardous situation that, if not avoided,
may result in MINOR INJURY.
IMPORTANT: The word IMPORTANT is used to identify
special instruction or procedures which, if
not strictly observed, could result in dam-
age to, or destruction of the machine,
process or its surrounding.
NOTE: The word NOTE is used to indicate points of
particular interest for more efficient and conven-
ient repair or operation.
Understand thoroughly the following precautions,
always keep them in mind before, during, and after
operation, and never take chances.
MAKING YOUR TRACTOR A SAFE
VEHICLE
HOW TO MAINTAIN SAFETY
(1) Never attempt to do the following: Modification
of the structure of the tractor Installation of other
type engine Installation of tires of other than the
original tire size.
Any malfunctions or failures of the tractor due to
unauthorized modification are not covered by
the warranty.
SAFETY
To Next Page
