Iseki TM3240 - Hydraulics; Electrical System; Capacities; Tread Width Settings

Hydrostatic Transmission
SPECIFICATIONS
83
MODEL: TM3200FH TM3240FH
Sub Models SME SMRE SME SMRE
HYDRAULICS:
Steering System; Type Hydrostatic (power)
Pump (flow divider)
Maximum Output
9.8 l / min at 2500 rpm 10.2 l / min at 2600 rpm
Presure 10301 kPa (105 kgf / cm
2
)
Main Hydraulic System; Pump Engine-mounted gear pump
Maximum Output 19.8 l / min at 2500 rpm 20.6 l / min at 2600 rpm
Pressure Relief valve setting 13740 kPa (140 kgf / cm
2
)
Rear Linkage; Type
Three-point hitch
Size
Category 1
Control
Position
Lift Capacity
540 kg measured at ball ends
ELECTRIAL SYSTEM:
System Voltage 12 volt, negative (-) ground
Battery cca @ 0 F (-18) 435 cca
Charging 40 amp alternator with internal regulator / rectifier
CAPACITIES:
Engine Creankcase with Filter 2.7 liters
Transmission 14.0 liters
Fuel Tank 25 liters
Cooling system
7.1 liters
Front Drive Axle 2.7 liters
TREAD WIDTH SETTINGS:
Front 4WD
Ag. Tires
Turf Tires
Rear 4WD
Ag. Tires
Turf Tires
MAXIMUM AXLE LOADING:
Front Axle
Rear Axle
750 mm
870 mm 900 mm
820 mm, 930 mm 820 mm, 940 mm
920 mm 910 mm
650 kg
750 kg