ISEKI TRACTORS
89
FACTORY RECOMMENDED
NEW TRACTOR PRE-DELIVERY INSPECTION CHECK LIST
ISEKI
USER'S NAME ___________________________________ AREA__________________ DATE _________________
DEALER ________________________________________ ADDRESS_____________________________________
TRACTOR MODEL ________________________________ SERIAL NO. ___________________________________
ENGINE SERIAL NO. ______________________________ COUNTRY_____________________________________
THIS PRE-DELIVERY INSPECTION CHECK LIST IS PROVIDED TO IDENTIFY THE ITEMS CHECKED AND
NECESSARY ADJUSTED BY THE DEALER PRIOR TO DELIVERY OF THIS MACHINE.
Inpsected the following and adjusted if necessary.
ENGINE
T Radiator filled with solution T Engine RPM(full throttle)
T Cooling system connections T Governor performance
T Fan and alternator belt tension T Electrical connections
T Engine oil T Service air cleaner
T All oil drain plugs T Air cleaner connections
T Oil pressure T Fuel line connections
T Engine RPM(idle) T Injection pump oil
CHASSIS
T Tyre inflation T Hydraulic system performance
T Front wheel hub bolts T Drive test
T Rear wheel hub bolts T Lubricate all grease fittings
T Torque all chassis bolts T Power-assisted steering operation(if equipped)
T Transmission oil T Front axle oil(4-WD)
T Front reduction case T Front axle operation(4-WD)
T Brake pedal free-play T Operation manual with tractor
T Clutch pedal free-play
Explained the following to the owner.
T Operation manual T Fuel system servicing and cleanliness
T Safety and safety start system T Draining of engine and radiator
T Instruments and controls T Air cleaner service
T Breaking in the new tractor T Tyre care
T Power take-off operation T Wheel tread adjustment
T Lubrication and maintenance schedule T Storage
T Explain use of Rollover Protective Structure (ROPS)
DEALER COPY (REMOVE FROM MANUAL)
To Next Page
