Chapter 2: OPERATION MODE
2-6 UNI-3 User’s Manual
2.3.5 ISSUING LABELS REQUIRING OPERATOR REGISTRATION
1.
The initial screen is displayed.
Note: The contents of the initial screen may differ
depending on the settings on your machine.
2.
Enter a PLU number and press the [PLU] key
on the keypad.
Note: If “ZERO” is not indicated on the screen, press
[0] on the keypad.
EXAMPLE PLU No.1
3.
The designated PLU screen is displayed.
EXAMPLE
A product to which its unit price and tare
weight were set beforehand.
4.
Put the product on the weighing platter.
The product is weighed and its total price is
calculated.
5.
Press an operator button to issue a label.
Non-traceable products Traceable products
To Next Page
Loading...
