Inspection and Installation
Confirm the LAN Setting
After configuring the LAN settings, the user need to confirm the settings to
make it valid in the instrument. The operation steps to confirm the LAN settings
are as follows.
1. Press [Shift]+[P-Set] (System) to enter into the system menu interface.
2. Use left and right keys or rotate the knob to select I/O Config and press
[Enter] key to confirm.
3. Use left and right keys or rotate the knob to select LAN and press [Enter]
key to confirm.
4. Use left and right keys or rotate the knob to select Lan Save and press
[Enter] key to confirm.
• No: indicates refuse to save the LAN setting.
• Yes: indicates save the LAN setting.
5. After setting, press [Esc] to exit.
Reset the LAN to the Default Settings
The operation steps to reset the LAN to the default settings are as follows.
1. Press [Shift]+[P-Set] (System) to enter into the system menu interface.
2. Use left and right keys or rotate the knob to select I/O Config and press
[Enter] key to confirm.
3. Use left and right keys or rotate the knob to select LAN and press [Enter]
key to confirm.
4. Use left and right keys or rotate the knob to select Lan Restore and press
[Enter] key to confirm.
• No: indicates refuse to reset the LAN to the default settings.
• Yes: indicates reset the LAN to the default settings.
5. After setting, press [Esc] to exit.
View LAN Interface Information
The operation steps to view the LAN interface information are as follows.
1. Press [Shift]+[P-Set] (System) to enter into the system menu interface.
2. Use left and right keys or rotate the knob to select I/O Config and press
[Enter] key to confirm.
3. Use left and right keys or rotate the knob to select LAN and press [Enter]
key to confirm.
The first displayed menu item Lan Info Info is to view the LAN interface
information.
4. Press [Enter] key to confirm.
5. Use left and right keys or rotate the knob to view the LAN interface
information. Refer to 1.7 系统菜单表格 for more information.
Copyright © Itech Electronic Co., Ltd.
29
To Next Page
Loading...
Need help?
General