Getting Started
currently. Press [Enter] key to enter the selected menu item and press [Esc] to
exit the menu.
3.4 Output On/Off Control
The [On/Off] key is used to turn the output/input on or off under
normal circumstances. Even if the instrument is in control by PC or the
keyboard is locked, the [On/Off] is still valid.
The [On/Off] key light is off and turning the output off does not place
the instrument in a safe state. Hazardous voltages may be present on
all output and guard terminals. Putting the equipment into an output-
off state does not guarantee that the outputs are powered off if a
hardware or software fault occurs. See the cautions about connecting
the test lines before connecting test lines.
You can press the [On/Off] key on the front panel to control the output status of
the power system. If the [On/Off] key light is on, indicates that the input is
turned on. The VFD displays the meter value such as voltage, current or power.
And displays the operating status such as CC/CV and so on. If the [On/Off] key
light is off, indicates that the input is turned off. The VFD displays that the power
supply state is OFF.
Copyright © Itech Electronic Co., Ltd.
42
To Next Page
Loading...
Need help?
General