Quick Reference
Reset
When the instrument is powered on, the instrument will in-
itialize some settings and [On/Off] state.
Last
When the instrument is powered on, the instrument will re-
main the same settings and [On/Off] state as last time
you turned off the instrument.
Last+Off
When the instrument is powered on, the instrument will re-
main the same settings as last time you turned off the in-
strument, but the [On/Off] is OFF state.
Sense Set the sense function state.
Off Turn the sense function off.
On Turn the sense function on.
ListTrig Source Set the trigger method for the List files running.
Immediate
Trigger immediately
Manual
Manual trigger
Bus
Bus trigger
External
External trigger
DLogTrig Source Set the trigger method for the data logging.
Immediate
Trigger immediately
Manual
Manual trigger
Bus
Bus trigger
Voltage Voltage trigger
Current
Current trigger
External
External trigger
I/O Set the communication information between instrument and PC.
USB USB communication interface
TMC
USB-TMC protocol
VCP
Virtual serial port
Display as the following format:
baud rate_data bit_parity bit_stop bit.
• Baud rate: 9600
• Data bit: 8
• Parity bit: N
• Stop bit: 1
LAN
Virtual LAN communication. After selecting
this option, you also need to set the commu-
nication parameters of the LAN, and the
menu items are the same as those in the
LAN menu (see below).
Copyright © Itech Electronic Co., Ltd.
12
To Next Page
Loading...
