ITech IT6090C-500-450

Technical Specification
Read Back Temperature
Coefficient
Voltage
≤50PPM/℃
(％of Output/℃+Offset)
Current ≤200PPM/℃
Rise time( no load ) Voltage
≤15ms
Rise time( full load ) Voltage
≤30ms
Fall time( no load ) Voltage
≤30ms
Fall time( full load ) Voltage
≤15ms
Transient Response Time Voltage
≤2ms
AC Input
Voltage
198V to 264V (Derating 50%) 342V to
528V(Three-phase four-wire)
Frequency
47Hz to 63Hz
Setup stability-30min Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% + 0.1%FS
Setup stability-8h Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% + 0.1%FS
Readback stability-30min Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% + 0.1%FS
Readback stability-8h Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% + 0.1%FS
Efficiency
~ 92%
Remote Sense
Compensation
≤5V (2Vmin)
Command Response Time
2mS
Power Factor 0.99
Maximum input current
22.25A
Maximum input apparent
13.2kVA
Storage temperature
-10℃ to 70℃
Protective function
OVP, OCP, OPP, OTP and Vsense reversed protection
Communication interface
Standard: USB, CAN, LAN; optional: GPIB, analog card, fiber
optic socket
Isolation (output to ground)
1000V
Number of series and
parallel units
≤1
Working temperature
0 to 50℃
Copyright © Itech Electronic Co., Ltd.
129
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com