Quick Start
Confirm settings
After completing the value setting or selecting a menu item, pushing the knob
acts like pressing [Enter] key to confirm the operation.
2.2.3 VFD Indicator Lamps Description
The IT6000C series Bi-directional Programmable DC Power Supply VFD indica-
tor lamps description is as follows:
Table 2–2 VFD Indicator Lamps Description
Flag Function
Description
Flag Function Description
OFF The output of the
power supply is
turned off.
Auto None
CV The power supply is
in a state of con-
stant voltage
output.
Sense Sense function of the power
supply is enabled.
CC The power supply is
in a state of con-
stant current output.
Rear Analog function begin to
work.
* The keyboard lock
is turned on.
Addr When received command
successfully, the flag will dis-
play 3 seconds.
CR None Rmt Indicates that the instrument
is working in remote control
mode.
Shift Using composite
function key
Error Error occur
SRQ Indicates that the
internal status re-
quest event occurs.
Prot The instrument enters the
protection state.
CW The power supply is
in a state of con-
stant power output.
Trig The instrument is in a state
of waiting for a trigger.
Copyright © Itech Electronic Co., Ltd.
15
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
