ITech IT6090C-500-450

Technical Specification
(within 12 months, 25℃
±5℃)
Current ≤0.1% + 0.1%FS
±(％of Output+Offset)
Power ≤0.5% + 0.5%FS
Resistance ≤1% + 1%FS
Read Back Accuracy Voltage
≤0.02% + 0.02%FS
(within 12 months, 25℃
±5℃)
Current ≤0.1% + 0.1%FS
±(％of Output+Offset)
Power ≤0.5% + 0.5%FS
Resistance ≤1% + 1%FS
Ripple Voltage ≤320mVpp(MAX: ≤800mVpp)
(20Hz -20MHz)
Current ≤0.1%FS RMS
Setup Temperature
Coefficient
Voltage
≤50PPM/℃
(％of Output/℃+Offset)
Current ≤200PPM/℃
Read Back Temperature
Coefficient
Voltage
≤50PPM/℃
(％of Output/℃+Offset)
Current ≤200PPM/℃
Rise time( no load ) Voltage
≤15ms
Rise time( full load ) Voltage
≤30ms
Fall time( no load ) Voltage
≤30ms
Fall time( full load ) Voltage
≤15ms
Transient Response Time Voltage
≤2ms
AC Input
Voltage
198V to 264V(降额50%)
342V to 528V(Three-phase four-wire)
Frequency
47Hz to 63Hz
Setup stability-30min Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% + 0.1%FS
Setup stability-8h Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% + 0.1%FS
Readback stability-30min Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% + 0.1%FS
Readback stability-8h Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% + 0.1%FS
Efficiency
~ 92%
Copyright © Itech Electronic Co., Ltd.
141
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com