Quick Start
• The instrument supports bi-directional energy transmission and feeds elec-
tric energy back to the grid in a pollution-free manner, thus cutting electricity
and heat dissipation costs and meeting energy-saving and environmental
protection demands;
• It supports optional system file upgrade and one-click check of such informa-
tion as system version, module version and system configuration;
• Support List, battery test, comprehensive protection and parallel function.
• During the test, the instrument can record specific data type (such as voltage
value) and save it in the USB memory device;
• The front panel can be inserted with the USB memory device to support
such functions as system file upgrade, import/export of List files and data
record;
• Strong Digital I/O Function: In addition to general digital signal I/O functions,
it can also be customized by supporting the wiring through different pins to
meet different special needs through different pin wirings;
• Select CC loop priority or CV loop priority. If voltage and current parameters
are to be changed frequently during test, the user can directly set related pa-
rameters through [V-set] and [I-set] on the front panel, which is very
convenient;
• Built-in voltage curves comply with multiple automotive standards for quick
user recall.
• Built-in maximum power point tracking (MPPT) mechanism to provide solar
photovoltaic curve simulation.
• High visible vacuum fluorescent display (VFD)
• Support optical fiber communication, which is applicable for loop control be-
tween units under parallel mode.
• Built-in USB/CAN/LAN communication interface
• Optional GPIB/RS–232 communication interface
• Optional external analog interface, and share an interface position with RS-
232.
• Strong trigger system;
• Use a virtual resistor to realize paralleled current sharing and series voltage
sharing between units;
• Enable a true seamless switch between positive current and negative cur-
rent while avoiding overshoot current and overshoot voltage;
• When the Sense function is turned on, it can ensure that the DUT is safe in
case of reverse connection or open circuit of the Sense line.
Copyright © Itech Electronic Co., Ltd.
10
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
