Quick Start
Exception Handling
If the instrument cannot start normally, please check and take measures by
reference to steps below.
1. Check whether the power cord is correctly connected and confirm whether
the instrument is powered.
2. Check whether the power in On. The power switch is under “|” On status.
3. Check whether the power voltage matches with the supply voltage. Please
refer to 1.3 Connecting the Power Cord to select proper AC input.
4. If you need additional assistance, contact ITECH technical support engineer.
Copyright © Itech Electronic Co., Ltd.
19
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
