ITech IT6500C Series User Manual

Technical Specification
5. Up time and down time mean the time of establishment from one value to
another value under ON status when the internal standard power dissipater is
enabled.
6. Use 12V/120AH battery for test.
7. When used in parallel, to balance power of each phase, distribute the
instrument to three phases. But must ensure that single machine input voltage
meets Specification requirements.
8. It means the maximum phase current value under minimum work input
voltage.
5.1.18 IT6537C
Parameter IT6537C Ver:V1.4
Output Rating ( 0 ℃-40
℃)
Output Voltage
0～1000V
Output Current
0～20A
Internal Sink
Current
1
0～3A
Output Power
0～6KW
Internal Sink
Power
1
0～100W
Output Resistance
Range
0～166.666Ω
Accuracy
2
0.25%+375mΩ*A
Resolution 10mΩ
Line regulation Voltage
≤0.01%+100mV
±(％of Output+Offset)
Current ≤0.01%+10mA
Load regulation Voltage
≤0.01%+375mV
±(％of Output+Offset)
Current ≤0.05%+20mA
Setup Resolution
Voltage
100mV
Current 1mA
Power 0.1W
Read Back Resolution
Voltage
100mV
Current 1mA
Power 0.1W
Setup Accuracy
3
Voltage
≤0.05%+375mV
（within 12 months,25℃
±5℃)
Current ≤0.2%+20mA
Copyright © Itech Electronic Co., Ltd.
139

ITech IT6500C Series Specifications

General

Brand	ITech
Model	IT6500C Series
Category	Power Supply
Language	English