ITech IT6500C Series

Quick Reference
Key Name Description
[Esc] Return key, used to cancel the setting or return
previous menu level
. Dot
Composite key [Shift], combined with other keys to realize functions marked
above keys. The detailed functions are listed as follows.
Keys Description
[Shift]+[P-set](Menu) Enter the system and config menu
[Shift]+[V-set](Setup) Enter the setup menu
[Shift]+[I-set](Function) Enter the Function menu
[Shift]+[Recall] (Save) Saves the present settings
[Shift]+[Meter] (Local) In remote control, press [Shift]+[Meter] (Local)
keys to switch the instrument to local control
mode
[Shift]+[Enter] (Trigger) Generate a local trigger signal
[Shift]+[On/Off] (Lock) Turn the keyboard lock on or off.
2.4 Rotary Knob and Coarse/Fine Button
Introduction
IT6500C series power supply is supplied with the voltage adjustment knob and
the current adjustment knob, as shown below.
Copyright © Itech Electronic Co., Ltd.
13