ITech IT6500C Series

Technical Specification
4. Read-back value accuracy means the read-back accuracy realized through
panel display or communication instructions; when external analog is used for
monitoring, the monitoring accuracy is 1%FS.
5. Up time and down time mean the time of establishment from one value to
another value under ON status when the internal standard power dissipater is
enabled.
6. Use 12V/120AH battery for test.
7. When used in parallel, to balance power of each phase, distribute the
instrument to three phases. But must ensure that single machine input voltage
meets Specification requirements.
8. It means the maximum phase current value under minimum work input
voltage.
5.1.14 IT6526C
Parameter IT6526C Ver:V1.6
Output Rating ( 0 ℃-40
℃)
Output Voltage
0～750V
Output Current
0～15A
Internal Sink
Current
1
0～1.5A
Output Power
0～3000W
Internal Sink Power
1
0～50W
Output Resistance
Range
0～188Ω
Accuracy
2
0.25%+300mΩ
Resolution 10mΩ
Line regulation
±(％of Output+Offset)
Voltage
≤0.01%+75mV
Current ≤0.1%+7.5mA
Load regulation
±(％of Output+Offset)
Voltage
≤0.01%+200mV
Current ≤0.05%+15mA
Setup Resolution
Voltage
100mV
Current 1mA
Power 0.1W
Read Back Resolution
Voltage
100mV
Current 1mA
Power 0.1W
Setup Accuracy Voltage
≤0.05%+300mV
Copyright © Itech Electronic Co., Ltd.
128