ITech IT7200 Series User Manual

Operation and Application
• NC: The relay is normally closed. Whether the instrument out is On or Off
will not affect the operation of relay.
4. Press [Esc] to exit the system menu setting.
When the DUT is a resistive load, it is recommended to select the NC option,
so that the output speed response is fast and the life of the relay can also be
prolonged. For safety reasons, when the DUT is other types of loads, you
need to select the Out Syn option.
Copyright © Itech Electronic Co., Ltd.
67

ITech IT7200 Series Specifications

General

Brand	ITech
Model	IT7200 Series
Category	Power Supply
Language	English