To Next Page

To Previous Page

Operation and Application

b. Rotate the knob to switch On and Off options. After selecting On or Off,

press [Enter] key to confirm.

• Off: After the Trigger key is pressed, the instrument will automatically

run the real-time List file.

• On: After the Trigger key is pressed, the instrument will run the real-

time List file in single step.

c. Press [Esc] to exit the function menu setting.

4. Press the [On/Off] key to turn on the instrument output.

50.0V 3.00A 50.0Hz

List 5 Step 0/ 7 Stop

5. Press the composite keys [Shift] + [On/Off](Trigger) on the front panel to

run the selected List file.

50.0V 3.00A 50.0Hz

List 5 Step 1/ 7 Run

• When List Trigger = On, press the Trigger key once, and the instrument

will run one step of List output.

• When List Trigger = Off, the instrument will output based on defined List.

4.8.3 Dimmer Function

The Dimmer Function aims to adjust the light illuminance intensity by setting the

phase angle and concealing the leading edge or trailing edge waveform. This

IT7200 series power supply supports front and rear phase angle dimmer or

speed adjustment test to verify whether the product has potential quality prob-

lem when the end user uses dimmer or the speed controller.

• Dimmer of leading edge

• Dimmer of trailing edge

ITech IT7200 Series User Manual

Questions and Answers: