SOURce Subsystem
Copyright © Itech Electronic Co., Ltd. 89
Examples
VOLT:LATC 1
Query Syntax
[SOURce:]VOLTage:LED[:STATe]?
Returned Parameters
0 | 1
Related Commands
VOLT:ON
[SOURce:]RESistance:TRIGgered
This command sets the resistance level that will become active when the next
trigger occurs.
Command Syntax
[SOURce:]RESistance[:LEVel]:TRIGgered[:AMPLitude] <NRf+>
Parameters
MINimum through MAX | MINimum | MAXimum | DEFault
Unit
Ω (ohms)
*RST Value
MAXimum
Examples
RES:TRIG 120 RES:LEV:TRIG 150
Related Commands
RES
[SOURce:]POWer
This command sets the power of the load when operating in constant power
mode.
Command Syntax
[SOURce:]POWer[:LEVel][:IMMediate] <NRf+>
To Next Page
Loading...
