ITech IT8731

SOURce Subsystem
Copyright © Itech Electronic Co., Ltd. 74
Unit
A (amps per micro second)
*RST Value
MAXimum
Examples
CURR:SLEW MAX
Related Commands
CURR:SLEW:NEG
CURR:SLEW:POS
[SOURce:]CURRent:SLEW:POSitive
This command sets the slew rate of the current for positive going transitions.
MAXimum sets the slew to the fastest possible rate. MINimum sets the slew to
the slowest rate.
Command Syntax
[SOURce:]CURRent:SLEW:POSitive <NRf+>
Parameters
MINimum to MAXimum | MAXimum | MINimum | DEFault
Unit
A (amps per micro second)
*RST Value
MAXimum
Examples
CURR:SLEW:POS MAX
Query Syntax
[SOURce:]CURRent:SLEW:POSitive?
Returned Parameters
<NR3>
Related Commands
CURR:SLEW