ITech IT8731

IT873X Specific Commands
Copyright © Itech Electronic Co., Ltd. 46
Chapter6 IT873X Specific Commands
TRACe Command Summary
This command is channel specific.
Command
Description
:TRACe
:CLEar
:FREE?
:POINts <n>
:POINts?
:FEED <name>
:CONTrol <name>
:CONTrol?
:FEED?
:FILTer
[:STATe]
[:STATe]?
:DELay
:DELay?
:TIMer
:TIMer?
:DATA?
Clear readings form buffer
Query points available and points in use
Specify size of buffer (2 to 1024)
Query buffer size
Select source of readings(VOLTage, CURRent, TWO)
Select buffer control mode(NEVer or NEXT)
Query buffer control mode
Query source of readings for buffer.
Select the type of buffer data.
Query the type of buffer data.
Set the trigger delay time.
Query the trigger delay time.
Set the interval of timer.
Query the interval of timer.
Read all data in the buffer.
CHANnel Command Summary
Command
Description
Default Value
SCPI
:CHANnel <n>
:CHANel:ID?
Select the multiple electronic load
channel. Reads the model numbers
of the modules installed in the
mainframe.
1
-
SOURce Command Summary
Command
Description
Default
Value
SCPI
[:SOURce]
:INPut
[:STATe] <b>
[:STATe]?
:SHORt <b>
Set selected channel input states
Query Selected channel input states
Set selected channel Load short states
OFF
OFF
Y
Y