ITech IT8731 Programming Guide

IT873X Specific Commands
Copyright © Itech Electronic Co., Ltd. 47
:SHORt?
:SYNCon
:SYNCon?
:TIMer
[:STATe]
[:STATe]?
:DELay
:DELay?
:REMote
:SENSe
:SENSe?
:FUNCtion <name>
:MODE <name>
:MODE?
:FUNCtion?
:TRANsient
[:STATe] <b>
[:STATe]?
:CURRent
[:LEVel]
[:IMMediate]<NRf>
[:IMMediate]?
:RANGe <NRf>
:RANGe?
:SLEW
[:BOTH] <NRf>
:POSitive<NRf>
:POSitive?
:NEGative <NRf>
:NEGative?
:PROTection
[:STATe] <b>
[:STATe]?
:LEVel <NRf>
:LEVel?
:DELay <NRf>
:DELay?
:TRANsient
:MODE <name>
:MODE?
:ALEVel <NRf>
:ALEVel?
:AWIDth <NRf>
Query selected channel load short states
Set the ON/OFF state for trace mode.
Query the ON/OFF state for trace mode.
Set the timer ON/OFF satate.
Query the timer ON/OFF state.
Set the delay time for timer.
Query the delay time for timer.
Set the remote sense ON/OFF state
Query the remote sense ON/OFF state
Set Load regulation mode ( VOLTage,
CURRent, RESistance, POWer,
IMPedance)
Set Load input mode (FIXed or LIST)
Query the load input mode
Query the load regulation mode
Enable or disable transition Mode
Query Load transition mode
Set constant current value
Query the constant current
Set the constant current range
Query const current range
Set slew rate of current for pos. and neg.
Set slew rate of current for pos.
Query slew rate of current for pos.
Set slew rate of current for neg.
Query slew rate of current for neg.
TO disable or enable current protection
Get current protection state
Set current protection level
Get current protection level
Set current protection delay time
Query current protection delay time
Set current transiton mode（CONT or PULSe or
Toggel)
Query current transition mode
Set current transitionn level A
Query current transition level A
Set current transition width A
CURRe
nt
FIXed
OFF
MIN
MAX
MAX
MAX
MAX
ON
MAX
3
CONTi

ITech IT8731 Specifications

General

Brand	ITech
Model	IT8731
Category	Test Equipment
Language	English