SOURce Subsystem
Copyright © Itech Electronic Co., Ltd. 83
Parameters
0 | 1 | ON | OFF
Returned Parameters
1
Examples
VOLT:RANG:AUTO 1
Query Syntax
[SOURce:]VOLTage:RANGe:AUTO[:STATe]?
Returned Parameters
<NR1>
[SOURce:]VOLTage:ON
This command sets the voltage of sink current on.
Command Syntax
[SOURce:]VOLTage[:LEVel]:ON <NRf+>
Parameters
0 through MAX | MINimum | MAXimum | DEFault
Unit
V (volts)
*RST Value
MINimum
Examples
VOLT 5
Query Syntax
[SOURce:]VOLTage[:LEVel]:ON?
Returned Parameters
<NR3>
Related Commands
VOLT:LATCh
To Next Page
Loading...
