ITech IT8731

SOURce Subsystem
Copyright © Itech Electronic Co., Ltd. 81
Command Syntax
[SOURce:]CURRent[:LEVel]:TRIGgered <NRf+>
Parameters
0 to MAXimum | MAXimum | MINimum | DEFault
Unit
A (amperes)
Returned Parameters
MINimum
Examples
CURR:TRIG 15
Related Commands
CURR
[SOURce:]VOLTage
This command sets the voltage that the load will regulate when operating in
constant voltage mode.
Command Syntax
[SOURce:]VOLTage[:LEVel][:IMMediate] <NRf+>
Parameters
MINimum through MAX | MINimum | MAXimum | DEFault
Unit
V (volts)
*RST Value
MAXimum
Examples
VOLT 5
Query Syntax
[SOURce:]VOLTage[:LEVel][:IMMediate]?