ITech IT8731

IT873X Specific Commands
Copyright © Itech Electronic Co., Ltd. 50
Command
Description
Default
Value
SCPI
:SENSe
:AVERage
:COUNt <n>
:COUNt?
Set filter count（2 to 16）
Query filter count
14
-
MEASure, FETCh Command Summary
These commands are channel specific.
Command
Description
Default
Value
SCPI
:MEASure
:VOLTage
[:DC]?
:MAX?
:MIN?
:CURRent
[:DC]?
:MAX?
:MIN?
: CAPability?
:FETCh
:VOLTage
[:DC]?
:MAX?
:MIN?
:CURRent
[:DC]?
:MAX?
:MIN?
:POWer?
: CAPability?
Measure the DC voltage
Measure the max voltage
Measure the min voltage
Measure the DC current
Measure the max current
Measure the min current
Measure the discharging capability
Fetch the the last measured DC voltage
Fetch the last measured max voltage
Fetch the last measured min voltage
Fetch the the last measured DC current
Fetch the last measured max current
Fetch the last measured min current
Fetch the the last measured power
Fetch the last measured dischargingcapability
-
CALibrate Command Summary
These commands are channel specific.
Command
Description
Default
Value
SCPI
:CALibrate
:SECure
:SECure?
:INITital
Set calibration protection state
Query calibration protection state
Restore factory calibration parameter
ON