ITech IT8731

STATus Subsystem
Copyright © Itech Electronic Co., Ltd. 41
Query Syntax
STATus:CSUMmary[:EVENt]?
Parameters
None
Examples
STAT:CSUM:EVEN?
Returned Parameters
<NR1> (register value)
Related Commands
*CLS
STATus:CSUMmary:ENABle
This command sets or reads the value of the Channel Enable summary register.
This command is not channel specific, it applies to the entire mainframe.
Command Syntax
STATus:CSUMmary:ENABle <NR1>
Parameters
0 to 255
Examples
STAT:CSUM:ENAB 3
Returned Parameters
<NR1> (register value)
Related Commands
*CLS
STATus:OPERation?
This query returns the value of the Operation Event register. The Event register
is a read-only register that holds (latches) all events that are passed by the
Operation NTR and/or PTR filter. Reading the Operation Event register clears it.
This command is not channel specific, it applies to the entire mainframe.